Sensor Evaluation Kits
AG040C: ADL021 Externally-Powered Nanopower Sensor Evaluation Board
This kit includes an evaluation board with the ultraminiature, ultralow-power ADL021 magnetic switch. The board has a digital output, and can be powered from a 3.3-volt nominal supply. An LED shows the output. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. Typical sensor quiescent current is only 100 nA, the sensor operate point is 20 Oe, and the sensors are 1.1 mm x 1.1 mm. These miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).
- Part Number:
- AG040C
- Quantity in Stock:
- 27
$16.95
AAT001-10E-EVB01: 1.25 MOhm TDFN6 TMR Angle Sensor Eval Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT001-10E 1.25 MOhm Tunneling Magnetoresistance (TMR) analog angle sensor.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 5.5 V supply and provides sine and cosine analog outputs.
- Part Number:
- AAT001-10E-EVB01
- Quantity in Stock:
- 30
$19.95
AAT003-10E-EVB01: 40 kOhm TDFN6 TMR Angle Sensor Eval Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT003-10E40 kOhm Tunneling Magnetoresistance (TMR) analog angle sensor.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 5.5 V supply and provides sine and cosine analog outputs.
- Part Number:
- AAT003-10E-EVB01
- Quantity in Stock:
- 30
$19.95
AAT006-10E-EVB01: 1.5 mT TDFN6 TMR Angle Sensor Eval Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT006-10E1.5 mT, 1.25 MOhm Tunneling Magnetoresistance (TMR) analog angle sensor.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 5.5 V supply and provides sine and cosine analog outputs.
- Part Number:
- AAT006-10E-EVB01
- Quantity in Stock:
- 30
$19.95
AAT009-10E-EVB01: 6 MOhm TDFN6 TMR Angle Sensor Eval Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT009-10E 6 MOhm Tunneling Magnetoresistance (TMR) analog angle sensor.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 5.5 V supply and draws less than a microwatt. It provides sine and cosine analog outputs.
- Part Number:
- AAT009-10E-EVB01
- Quantity in Stock:
- 30
$19.95
AAT101-10E-EVB01: Full-Bridge TDFN6 TMR Angle Sensor Eval Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT101-10E Full-Bridge Tunneling Magnetoresistance (TMR) analog angle sensor.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 5.5 V supply and provides full-bridge sine and cosine analog outputs.
- Part Number:
- AAT101-10E-EVB01
- Quantity in Stock:
- 30
$19.95
AG040B: ADL021 Battery-Powered Nanopower Sensor Demonstration Board
This kit includes a demo board with the ultraminiature, ultralow-power ADL021 magnetic switch. An LED shows the sensor output. The board is powered by a three-volt lithium coin cell (included), and the sensor quiescent power consumption is so low that the battery will last indefinitely. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. Sensor quiescent current is only 100 nA typical; the sensor operate point is 20 Oe; and the sensors are 1.1 mm x 1.1 mm. These miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).
- Part Number:
- AG040B
- Quantity in Stock:
- 31
$19.95
AG040T: ADT923 3V Battery-Powered TMR Switch Demonstration Board
The AG040T Demonstration Board has an ADT923 TMR magnetic switch powered by a three-volt lithium coin cell (included). An LED to show the sensor output. The sensor’s low quiescent power allows the battery to last at least several years with occasional LED use. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. The sensors are 1.1 mm x 1.1 mm x 0.35 mm, and these miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).
- Part Number:
- AG040T
$19.95
AG959-07E: SM225 High-Speed Smart TMR Magnetometer breakout board
The AG959-07E provides easy connections to an SM225-10E Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.6 by 0.75 inches (15 x 19 mm).
- Part Number:
- AG959-07E
- Quantity in Stock:
- 5
$19.95
AG960-07E: SM324 Ultraprecise Smart Magnetometer breakout board
The AG960-07E provides easy connections to an SM324-10E Precision TMR Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
- Part Number:
- AG960-07E
- Quantity in Stock:
- 6
$19.95
AG966-07E: ASR012 I2C/PWM Smart TMR Angle Sensor breakout board
The AG966-07E provides easy connections to an ASR012-10E I2C/PWM TMR Smart Angle Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
- Part Number:
- AG966-07E
- Quantity in Stock:
- 2
$19.95
AG967-07E: ASR022 ABZ Smart TMR Encoder Sensor breakout board
The AG967-07E provides easy connections to an ASR022-10E ABZ TMR Encoder Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
- Part Number:
- AG967-07E
- Quantity in Stock:
- 14
$19.95
AG968-07E: SM228 15 mT I2C Smart TMR Magnetometer Breakout Board
The AG968-07E provides easy connections to an SM228-10E Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.6 by 0.75 inches (15 x 19 mm).
- Part Number:
- AG968-07E
- Quantity in Stock:
- 1
$19.95
AG975-07E: SM223 1.5 mT I2C Smart TMR Magnetometer Breakout Board
The AG975-07E provides easy connections to an SM223-10E high-sensitivity Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.6 by 0.75 inches (15 x 19 mm).
- Part Number:
- AG975-07E
$19.95
AG977-07E: ASR003 Smart TMR Angle Sensor breakout board
The AG977-07E provides easy connections to an ASR003-10E TMR Smart Angle Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
- Part Number:
- AG977-07E
$19.95
ALT021-10E-EVB01: 0-0.25 mT TMR magnetometor eval board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT021-10E ultrahigh sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.
- Part Number:
- ALT021-10E-EVB01
- Quantity in Stock:
- 41
$19.95
ALT023-10E-EVB01: 0-1 mT TMR magnetometor eval board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT023-10E high sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.
- Part Number:
- ALT023-10E-EVB01
- Quantity in Stock:
- 60
$19.95
ALT025-10E-EVB01: 0-10 mT DFN6 TMR magnetometor eval board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT025-10E Tunneling Magnetoresistance (TMR) analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.
- Part Number:
- ALT025-10E-EVB01
- Quantity in Stock:
- 19
$19.95
ALT025-14E-EVB01: 0-10 mT DFN4 TMR magnetometor eval board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT025-14E Tunneling Magnetoresistance (TMR) analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.
- Part Number:
- ALT025-14E-EVB01
$19.95
ALT026-10E-EVB01: 0-20 mT DFN6 TMR magnetometor eval board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT026-10E Tunneling Magnetoresistance (TMR) analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.
- Part Number:
- ALT026-10E-EVB01
$19.95
