Products meeting the search criteria

Displaying 1 to 20 (of 29 products)
IL3485-3E: High-Speed Passive-Input Isolated RS485 Xcvr, 2.5 kV, Narrow SOIC

Up to 20 Mpbs, 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3485-3E

$4.19

IL41050TFD-3E: Isolated CAN FD Transceiver, 125C, 5 Mbps, 2.5 kV, Narrow SOIC

The IL41050TFD-3E is an isolated CAN FD transceiver. 125C; 5 Mbps; 3.3 V or 5.0 V input logic. 16-pin narrow-body (0.15'') RoHS SOIC package.

Part Number:
IL41050TFD-3E

$3.62

IL41050-01: Narrow-Body Isolated CAN Evaluation Board

The CAN Evaluation Board provides a complete isolated Controller Area Network node using the popular IL41050TA-3E isolated narrow-body isolated CAN transceiver.

The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.

Part Number:
IL41050-01
Quantity in Stock:
9

$49.95

IL3585-3-01: RS-485 Narrow-Body Isolator Evaluation Board

The RS-485 Narrow-Body Isolated Transceiver Evaluation Board provides a complete isolated RS-485 node using the unique 0.15"-wide IL3585-3E isolated transceiver. The board provides screw terminal and RJ45 connections, and demonstrates best layout practices.

Termination, pull-up, and pull-down resistors are easily changed to accommodate various fanouts and termination methods.

The transceiver delivers an exceptional 2.3 V differential output into a 54 Ohm load and data rates to 40 Mbps. The device is also compatible with 3.3 V input supplies, allowing interface to standard microcontrollers without additional level shifting.

Isolating RS-485 nodes reduces noise, eliminates ground loops, and improves safety.

Part Number:
IL3585-3-01
Quantity in Stock:
10

$74.95

IL614-3-01: IL614-3E 3-Ch (2 xmt, 1-rcv) Passive-In Isolator Eval Bd, Narrow

These 2 x 3.5-inch (50 x 90 mm) boards have an IL614-3E three-channel (two transmit, one receive) passive isolator, input resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.

Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.

Part Number:
IL614-3-01
Quantity in Stock:
50

$49.95

IL715-3-01: 4-Ch  (all same dir) Narrow-Body Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL715-3E four-channel (all the same direction) narrow-body isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The boards let you evaluate the world's best isolators.

Part Number:
IL715-3-01
Quantity in Stock:
50

$49.95

IL3285-3E: Fractional Load Passive-Input Isolated RS485 Xcvr, 2.5 kV, Narrow SOIC

Isolated 1/8 fractional load RS485 transceiver compatible with 3.3 V or 5.0 V input logic. Additional features include 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3285-3E
Quantity in Stock:
59

$4.12

IL814T-3E: 3-Channel (2 transmit, 1 receive) Top-of-the-Line Isolator, 2.5 kV, Narrow SOIC

The IL814T-3E is NVE's top-of-the-line three-channel bidirectional isolator, with best-in-class specifications:
• 125°C max. operating temperature
• 110 Mbps
• 10 ns propagation delay
• DC-correct; deterministic power-up
• 50 kV/µs typ.; 30 kV/µs min. transient immunity
• IEC 60747-5-5 (VDE 0884) certified—600 Vrms WV
• 44000-year barrier life
• Low EMC footprint

The part uses NVE's unique 16-pin narrow-body (0.15"-wide) SOIC package.

Part Number:
IL814T-3E
Quantity in Stock:
72

$6.89

IL614-3E: 3-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, Narrow SOIC

The IL614-3E is a 3.3/5V, 3-channel (2 transmit, 1 receive), 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 16-pin 0.15" SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL614-3E
Quantity in Stock:
378

$6.99

IL3222-3E: Fractional Load Passive-Input Isolated RS422 Xcvr, 2.5 kV, Narrow SOIC

Isolated 1/8 fractional load RS422 transceiver compatible with 3.3 V or 5.0 V input logic. Additional features include 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3222-3E
Quantity in Stock:
1533

$4.12

IL716T-3E: 125C 4-Channel (2 each direction) Isolator, 2.5 kV, Narrow SOIC

The IL716T-3 is a high temperature, 3.3/5V, multi-channel, isolated 110 Mbps CMOS-compatible logic buffers with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL716T-3E
Quantity in Stock:
1552

$8.23

IL613-3E: 3-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, Narrow SOIC

The IL613-3E is a 3.3/5V, 3-channel (all in same direction), 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop GMR Sensor technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 16-pin 0.15" SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL613-3E
Quantity in Stock:
1958

$6.99

IL516-3E: 4-Channel (2 each direction) Isolator, 2.5 kV, Narrow SOIC

The IL516 is a 3.3V/5V, multichannel 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity, -40°C to 85°C. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL516-3E
Quantity in Stock:
2374

$7.38

IL716-3E: 4-Channel (2 each direction) Isolator, 2.5 kV, Narrow SOIC

The IL716-3 is a 3.3/5V, multichannel isolated 110 Mbps CMOS-compatible logic buffers with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL716-3E
Quantity in Stock:
3981

$7.69

IL717T-3E: 125C 4-Channel (3 transmit, 1 receive) Isolator, 2.5 kV, Narrow SOIC

The IL717T-3 is a high temperature 3.3/5V, multi-channel, isolated, 110 Mbps, CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL717T-3E
Quantity in Stock:
4327

$8.23

IL262-3E: 5-Channel (3 transmit, 2 receive) Isolator, 2.5 kV, Narrow SOIC

The IL261-3E is a 3.3/5.0-volt, 5 channel (3 transmit; 2 receive) isolated, 110 MBaud CMOS compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 30 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL262-3E
Quantity in Stock:
4550

$8.54

IL3085-3E: Low-Cost Isolated RS485 Transceiver, 2.5 kV, Narrow SOIC

The IL3085-3 is a cost-effective isolated 4 Mbps RS-485 transceiver, compatible with 3.3 V or 5 V input logic. 7 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin narrow-body (0.15''-wide) SOIC package (Pb-free).

Part Number:
IL3085-3E
Quantity in Stock:
4968

$4.04

IL260-3E: 5-Channel (all same direction) Isolator, 2.5 kV, Narrow SOIC

The IL260-3E is a 3.3/5.0-volt, 5-channel isolated, 110 Mbps, CMOS-compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin, narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL260-3E
Quantity in Stock:
5666

$8.54

IL41050TA-3E: Isolated High-Speed, Low-Power Isolated CAN Transceiver, 2.5 kV, Narrow SOIC

The IL41050TA-3E is a high-speed, low-power isolated ISO 11898 compliant CAN transceiver. 125C; 180 ns typ. loop delay; ISO 11898 compliant; >110 node fanout; 1 Mbps; 3.3 V or 5.0 V input logic. 16-pin narrow-body (0.15'') RoHS SOIC package.

Part Number:
IL41050TA-3E
Quantity in Stock:
7283

$3.62

IL715T-3E: 125C 4-Channel (all same direction) Isolator, 2.5 kV, Narrow SOIC

The IL715T-3 is a high temperature 3.3/5V, multi-channel, isolated, 110 Mbps, CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL715T-3E
Quantity in Stock:
7943

$8.23

Displaying 1 to 20 (of 29 products)