| In This Issue | |
| Quick Links | |
| New Isolator Catalog | |
|
Hot off the presses, the popular IsoLoop Short-Form Catalog was updated in September and now includes CAN isolators.
Eight pages of the most useful data and applications, the catalog is essential for anyone who specifies or purchases isolators.
Request the printed version (the perfect addition to any coffee table) or download the catalog. | |
|
| Fun Formulas | |
|
Paradox
| |
|
| |
Featured Product |
|
PDIP Isolators
State-of-the-art technology in a venerable package
Pin-for-pin replacements for popular optocouplers, IsoLoop PDIP isolators provide higher speed, less distortion, and unlimited life without changing board layout.
Key PDIP isolator features include:
JDEC standard package
7 mm external high-voltage clearance
Passive or digital inputs
One or two channels (including bidirectional)
CMOS or open-drain outputs
Up to 125°C (T-Series)
UL1577 / IEC 61010-2001
2.5 kVrms isolation (1 min.)
300 Vrms working voltage
A dozen PDIP isolator part types are currently in
stock and available for immediate delivery with no minimum order:
Part
Number | Mbps
Data
Rate | Tx/
Rx
Ch | Input | Output | Features | Max.
Temp. |
IL610-2 | 100 | 1/0 | Passive | CMOS | Output Enable | 85°C |
IL610A-2 | 10 | 1/0 | Passive | Open-drain | Output Enable | 85°C |
IL611-2
| 100 | 2/0 | Passive | CMOS | | 85°C |
IL611A-2 | 10 | 2/0 | Passive | Open-drain | | 85°C |
IL612-2
| 100 | 1/1 | Passive | CMOS | Bi-directional | 85°C |
IL612A-2 | 10 | 1/1 | Passive | Open-drain | Bi-directional | 85°C |
IL710-2 | 110 | 1/0 | Digital | CMOS | Output Enable | 100°C |
IL711-2 | 110 | 2/0 | Digital | CMOS | | 100°C |
IL712-2 | 110 | 1/1 | Digital | CMOS | Bi-directional | 100°C |
IL710T-2 | 110 | 1/0 | Digital | CMOS | Output Enable | 125°C |
IL711T-2 | 110 | 2/0 | Digital | CMOS | | 125°C |
IL712T-2 | 110 | 1/1 | Digital | CMOS | | 125°C |
|
Application Corner |
|
Drop-In Opto Replacement
By Sandy Templeton
Director, Isolator
Product Development and Applications
IL600A-Series passive-input isolators are designed as opto replacements with inputs similar to LEDs and outputs similar to phototransistors.
IsoLoop Isolators match optocoupler versatility but have smaller packages, less distortion, better reliability, and unlimited life.
Available packages include venerable PDIP8s (see story above) and SOIC8s. Unique MSOPs and SOIC16s are also available to reduce board space compared to optos.
Inputs can be configured for inverting or non-inverting operation and accommodate a wide input voltage range. Versions are available with either CMOS or open-drain outputs.
Open-drain outputs can be wire-ORed together much like an optocoupler:
This illustrative circuit provides fail-safe output (logic high output for zero coil current), 2.5 kVrms isolation, and 20 kV/µs transient immunity. Typical logic output sink current is 10 mA for each isolator.
Application Bulletin AB-20Optocoupler Alternatives (.pdf)
|
| |