WEBVTT

1
00:00:00.680 --> 00:00:03.180
♪ Real cool ♪

2
00:00:03.180 --> 00:00:06.700
♪ Our cylinders are clicking ♪

3
00:00:06.700 --> 00:00:10.840
Hi, I'm Jay Brown from NVE Corporation.
Today we're looking at

4
00:00:10.849 --> 00:00:15.179
cylinder position, or “CPS” sensors.
This is a cutaway of

5
00:00:15.179 --> 00:00:20.550
a typical pneumatic cylinder.
Here's the magnet.

6
00:00:20.550 --> 00:00:29.650
The sensor goes in this slot.
This is a CPS sensor assembly.

7
00:00:29.650 --> 00:00:35.400
Here's an un-potted sensor circuit board.
This PCB uses surface-mount parts,

8
00:00:35.400 --> 00:00:40.590
and is 4.2 millimeters wide.
Boards can also be made

9
00:00:40.590 --> 00:00:46.720
as chip-on-board assemblies, like this.
This assembly is only 2.9 millimeters wide,

10
00:00:46.720 --> 00:00:52.190
but requires purchase of the parts
in die form from NVE.

11
00:00:52.190 --> 00:00:54.820
As the cylinder moves,
the sensor detects the magnet

12
00:00:54.820 --> 00:00:59.290
as indicated by the LED.
For convenience, we're using

13
00:00:59.290 --> 00:00:59.600
a 9-volt battery as a power supply,
but the GMR Switches handle

14
00:00:59.600 --> 00:01:02.240
a supply range of 4.5 to 30 volts.
AD8 and AD9 GMR Switches

15
00:01:02.240 --> 00:01:06.340
are complete CPS solutions.
They include:

16
00:01:06.340 --> 00:01:10.009
voltage regulators;
LED drivers; and

17
00:01:10.009 --> 00:01:12.929
short-circuit protection.
Here's a reference circuit

18
00:01:12.929 --> 00:01:17.249
using an AD821.
When the magnet is detected,

19
00:01:17.249 --> 00:01:21.060
the sensor bridge activates;
the LED turns ON;

20
00:01:21.060 --> 00:01:24.759
and the load is powered.
The AD821 also contains

21
00:01:24.759 --> 00:01:28.219
short-circuit protection.
If the output is shorted,

22
00:01:28.219 --> 00:01:31.530
the voltage across this shunt resistor
exceeds the circuit's

23
00:01:31.530 --> 00:01:38.619
145 millivolt short-circuit threshold.
With this 0.47 ohm shunt resistor,

24
00:01:38.619 --> 00:01:43.869
the threshold is about
300 milliamps.

25
00:01:43.869 --> 00:01:47.069
The output will cycle
as long as the short circuit persists,

26
00:01:47.069 --> 00:01:52.189
preventing damage to the part.
The short-circuit cycle times

27
00:01:52.189 --> 00:01:57.999
are set by external capacitors.
Our GMR switches are available

28
00:01:57.999 --> 00:02:00.270
with a variety of
magnetic characteristics

29
00:02:00.270 --> 00:02:04.670
and output options.
We also have ultraminiature

30
00:02:04.670 --> 00:02:06.920
Nanopower Sensors
that are designed

31
00:02:06.920 --> 00:02:11.470
for 2-wire CPS applications.
We have a separate video

32
00:02:11.470 --> 00:02:16.580
on 2-wire interfaces.
To complement our digital switches,

33
00:02:16.580 --> 00:02:20.820
we offer the DB001-Series
Power Switch IC

34
00:02:20.820 --> 00:02:25.240
with additional CPS functions.
Here's an enhanced Reference Circuit

35
00:02:25.240 --> 00:02:29.140
with a DB001.
The DB001 has:

36
00:02:29.140 --> 00:02:32.700
a voltage regulator;
an LED driver;

37
00:02:32.700 --> 00:02:35.910
an output driver; and
thermal shutdown circuitry.

38
00:02:35.910 --> 00:02:36.900
This demonstration board has
a DB001 along with

39
00:02:36.900 --> 00:02:39.450
an AD924-00E GMR Switch IC.
When the magnet is detected,

40
00:02:39.450 --> 00:02:44.740
the DB001 turns the LED ON,
and powers the load.

41
00:02:44.740 --> 00:02:49.180
The DB001 can drive nasty loads.
We have the demonstration board

42
00:02:49.180 --> 00:02:56.340
powered with 25 volts, driving
a 120 Ohm, one millihenry load.

43
00:02:56.340 --> 00:03:01.280
We have
a 200 milliamp output

44
00:03:01.280 --> 00:03:07.060
and a very clean waveform.
So to sum up,

45
00:03:07.060 --> 00:03:13.080
we've seen that NVE GMR Switches
are ideal for Cylinder Position Sensors.

46
00:03:13.080 --> 00:03:16.740
Click, e-mail, or call us for more information
or design support.


