WEBVTT
Kind: captions
Language: en

00:00:00.000 --> 00:00:10.660
♪ High voltage ♪

00:00:10.660 --> 00:00:14.921
We're demonstrating NVE's groundbreaking 
V-Series isolators, which were recently 

00:00:14.921 --> 00:00:18.750
upgraded to a remarkable seven kilovolts 
isolation spec.  

00:00:20.000 --> 00:00:21.761
Here's the test setup:

00:00:21.761 --> 00:00:25.920
An Arduino is isolated from a human 
interface, in this case an oscilloscope,  

00:00:26.944 --> 00:00:29.158
by a pair of four-channel isolators. 

00:00:30.349 --> 00:00:32.529
For this demonstration,
we put conformal coating  

00:00:32.529 --> 00:00:36.094
on the isolators to minimize  
arcing through the air.

00:00:37.111 --> 00:00:41.187
An R/2R resistor array serves as 
digital-to-analog converter 

00:00:41.187 --> 00:00:42.830
for the isolated output.

00:00:43.575 --> 00:00:48.088
We're powering the setup with batteries to 
ensure the power supplies are isolated.  

00:00:49.290 --> 00:00:52.846
The highpot tester is set for 
seven kilovolts, 

00:00:52.846 --> 00:00:54.846
with a 0.1 milliamp 
fail-current threshold.

00:00:57.700 --> 00:00:59.510
Parts have to withstand seven kilovolts 

00:00:59.510 --> 00:01:03.302
for at least 60 seconds 
to be rated at seven kilovolts.

00:01:03.703 --> 00:01:06.753
No non-optical isolators have met that standard... 

00:01:07.421 --> 00:01:08.891
...until now.

00:01:09.604 --> 00:01:11.869
We'll connect a meter in parallel 
with the isolators

00:01:11.869 --> 00:01:15.027
to ensure the fail current threshold is working.

00:01:15.608 --> 00:01:18.463
The meter has 10 megaohm resistance 
on this scale,

00:01:18.463 --> 00:01:20.712
so it should fail the 0.1 milliamp threshold

00:01:20.712 --> 00:01:22.820
at about a kilovolt.

00:01:22.820 --> 00:01:26.799
If it hadn't failed, 
we'd have destroyed the meter.

00:01:28.687 --> 00:01:32.331
Now we'll run the test 
without the meter limiting the voltage.

00:01:32.331 --> 00:01:37.092
The heartbeat keeps going, 
showing the isolators are intact. 

00:01:38.962 --> 00:01:42.391
While we're waiting for 
the 60 seconds to count down...

00:01:42.391 --> 00:01:44.610
...here's the schematic.

00:01:45.679 --> 00:01:51.953
The Arduino has a lookup table 
to provide 8-bit ECG data.

00:01:56.850 --> 00:01:59.753
Here's a summary of the 
parts we used in this demo:

00:02:00.223 --> 00:02:04.471
There are links
in the YouTube description.

00:02:08.380 --> 00:02:11.670
This is the evaluation board we used: 

00:02:11.670 --> 00:02:14.427
The isolator features 
are listed on the bottom. 

00:02:15.420 --> 00:02:18.385
V-Series isolator features include: 

00:02:18.385 --> 00:02:22.121
best-in-class seven kilovolt 
isolation voltage,

00:02:22.569 --> 00:02:26.016
as well as best-in-class
100 teraohm barrier resistance,

00:02:26.595 --> 00:02:30.732
and best-in-class 1.2 kilovolt working voltage.

00:02:32.956 --> 00:02:35.000
The minute is up. 

00:02:35.000 --> 00:02:36.777
The parts pass.

00:02:36.777 --> 00:02:40.228
There you have it--
seven kilovolts for a minute.

00:02:42.033 --> 00:02:44.060
Click, email, or call for more information, 

00:02:44.060 --> 00:02:46.053
or to order eval boards or parts. 

00:02:46.499 --> 00:02:48.346
There are links
in the YouTube description.

00:02:49.236 --> 00:02:50.957
Please like this video,

00:02:50.957 --> 00:02:53.862
and subscribe to our YouTube channel 
for updates.

